Midea 4 ton T3 Inverter Ductable Air Conditioner

Midea Ductable type inverter air conditioner from the A5 series has high energy efficiency A++ for cooling mode and A+++ for heating mode. The air conditioners from A5 series enable to connect two indoor units with one outdoor unit. The duct type air conditioners can provide fresh air to the room for healthy and clean air. Due to its inverter technology feature, there is high saving on electricity consumptions and eventually your bills reduce.

ADJUSTABLE STATIC PRESSURE SWITCH

By using the switch on the control board of the device it is possible to set manually the external static pressure of the unit

REFRIGERANT LEAKAGE DETECT

If the unit detects refrigerant leakage, a message EC will appear on the indoor unit display and the air-conditioner stops operation. This function additionally protects the compressor against damage.

TEMPERATURE COMPENSATION

The temperature measured by the sensor placed inside the air conditioner, depending on the unit installation height may differ from the temperature at ground level, even by few degrees. The temperature compensation function allows setting appropriate adjustment, to ensure more accurate temperature control and increase the comfort of air conditioner exploitation.

ANTI-COLD AIR FUNCTION

By activating the “Anti-cold Air Function” the air conditioner automatically blows hot air to ensure maximum comfort.

EMERGENCY OPERATION

In case of temperature sensor malfunction, the air conditioner displays an error code without stopping operation. This enables the air conditioner to operate in emergency mode until the arrival of service in cases, where the air conditioning is actually necessary.

2-WAY DRAINING

Both left and right sides of indoor unit are possible for drainage hose connection, easy for installation.

FOLLOW ME

Temperature sensor built in the remote controller will sense its surrounding temperature. So the unit can adjust room temperature more accurately to give you comfort.

CENTRAL CONTROLLER

The central controller enables you to control up to 64 indoor units. The control can be done individually or in groups. The maximum cable length is 1200m.

ERROR ALARM PORT

The built-in PCB can output alarm signal, which makes setting up an external alarm light or vibration gauge possible.

LOUVER POSITION MEMORY

The air conditioner stores the recent setting of the air louvres and restores them every time you turn it on.

FRESH AIR

Outdoor air can be supplied to the air conditioner with use of additional ventilation duct. This provides the necessary oxygen, making the room conditions even more comfortable.

LOW AMBIENT COOLING

With a built-in low ambient kit or special designed PCB, outdoor fan speed can be changed automatically according to condensation temperature. The air conditioner can run cooling operation even when the outdoor ambient temperature down to -15℃.

WIRED CONTROLLER

Compared with an infrared remote controller, a wired controller can be fixed on the wall and avoid mislaying. It’s mainly used for a commercial zone and makes air conditioner control more convenient.

24-HOUR TIMER

Set the unit to start and stop operation automatically in a 24 hours period.

BUILT-IN DRAIN PUMP

The drain pump can lift the condensing water up to 750mm.