How To Extend Your Geyser’s Life Span: 7 Tips
When it comes to relaxing and unwinding after a really long day, the thought of a hot shower instantly makes you feel better. Other than just rejuvenating you, hot water baths are known to have multiple health benefits like a good night’s sleep, clean & healthy skin, relieving symptoms of cold and fever, and more. And when we are talking about hot showers, we cannot ignore how water heaters are a real blessing. They make our life easy, convenient, and stress-free.
We can’t imagine our lives without a water heater in the winter. While we have already shared tips on how to make your Compton water heaters winter-ready, we are here to divulge a little more about how to increase your geyser lifespan.
We know how to use a geyser, but not many of us get involved in the upkeep of this essential home appliance. While an average water heater is supposed to last you 8-12 years, most of the time, we end up spending money on geyser repair before that duration. So, here are 7 tips on extending your water heater’s lifespan.
1. Turn off the geyser when not in use:
If you are done using the geyser, you must turn it off. A storage water heater tank is made of stainless steel/mild steel with polymer or a glass line coating and an extra tank. As soon as the water temperature dips in the tank, the geyser’s heating element will raise the temperature. This increases the usage of geysers and also increases power consumption.
If you are worried about the water turning cold, remember that even after turning off the water heater, the storage tank should have the capacity to hold the temperature of the water for 4-5 hours.
2. Insulate your water heater:
Insulating the pipes of your water heater can make it more energy efficient and also increase the temperature of the water by 2-4 degrees. While this may not increase the life span of your water heater, the geyser pipe insulation will definitely lead to more productive appliance usage. You should definitely consider doing this if you have noticed an increase in your electricity bill.
3. Always empty the water heater tank when not in use:
If you are using a storage geyser, it is advised not to keep the water stored in the tank for a long time. This will lead to the formation of bacteria in the stagnant water and also cause a bad odour. The best solution is to empty the geyser tank when not used, especially if you are travelling.
4. Replace damaged elements in your water heater:
One of the most basic geyser maintenance tips is to ensure there is no limestone formation in the tank. It is literally your water heater’s biggest enemy. It ruins the valve and other heating elements of the geyser. To prevent this from happening, it is essential to maintain the heating elements from time to time before the limescale makes them completely useless.
5. Ensure regular maintenance of your geyser:
Instead of scrolling through last-minute water heater repair tips, it is essential to ensure regular geyser servicing takes place. These routine checks will help prevent any irreversible damage to your geyser. During these services, make sure you:
1. Learn how to use a geyser in the most efficient way possible
2. Keep all the essential information about your geyser written down, like the model number, and the type of water heater you have.
6. Do not use the water heater during voltage fluctuations:
Just like the refrigerator or television, the geyser requires a consistent supply of electricity when switched on. When the voltage fluctuates, it may hinder the smooth operation of the water heater. Ensure your geyser’s voltage supply is neither too high nor too low.
7. Use a water softener:
The water quality at home can affect your water heater’s performance. If the water supply has high quantities of calcium and magnesium, this could mean the water you get is hard water. Hard water causes mineral deposits at the bottom of your heater, and if this is not cleaned out, it could considerably reduce the lifespan of your water heater. To prevent this from happening, install a water softener, which will filter out the minerals that make the water hard, allowing only soft water to flow through the pipes.
Sometimes, it is necessary to replace your old geyser if the damage is beyond your control. However, how would you know when to do this? If your water heater shows any of the below signs, then it’s time for you to buy a new geyser:
1. Ageing: This may sound obvious but is often ignored. If your geyser has been functioning for over 12 years, then it’s time to replace it. The minerals in the water may cause wear and tear resulting in inefficient functioning.
2. Smelly hot water: Sometimes, the water flowing out of the tap may have a metallic smell. This odour is because of the geyser’s metallic elements flaking off and mixing with the water.
3. Increasing repair costs: If the geyser consistently requires repairing, then it’s a sign to get a new water heater.
At Crompton, you can rely on smart water heaters that provide quick and consistent heating and look good. You can pick from a range of water heaters that boast extraordinary features. From storage water heaters to instant geysers, you can explore your choices online.
